2x60 Slab Bin

Designed for secure storage of graded coin slabs and small collectibles

Slab Bin

Overview

  • Internal Dimensions: 143mm L × 65mm W × 78mm H
  • External Dimensions: 148mm L × 70mm W × 90mm H (Excluding Lid)
  • Primary Use: Storing PCGS/NGC graded slabs and similar collectibles
  • Capacity: Holds 3-5 standard coin slabs
  • Material: PLA or PETG
  • Color Options: White, Black, or Custom
Table of contents
  1. 2x60 Slab Bin
    1. Features
    2. Compatible Contents
    3. Technical Specifications
    4. Model Files
    5. Printing Recommendations
    6. Assembly
    7. Maintenance

Features

  • Secure Lid: Snug-fitting lid to protect contents
  • Stackable Design: Magnetic Interlocking design for secure stacking
  • NFC Ready: NFC tag integration for digital tracking
  • Foam Padding: Optional foam padding to prevent slab movement (3mm thickness)

Compatible Contents

  • PCGS Graded Slabs (various sizes)
  • NGC Graded Slabs (various sizes)
  • ANACS Graded Slabs
  • Other similar-sized collectible slabs

Technical Specifications

  • Wall Thickness: 2.5mm
  • Base Thickness: 7.0mm - with 4mm Magnet Well
  • Lid Type: Snap-fit
  • Weight: ~55g (empty)
  • Foam Padding Thickness: 3mm (optional)

Model Files

  • 3D Models will be available soon on Makerworld! Makerworld

Printing Recommendations

  • Layer Height: 0.2mm
  • Infill: 20% (30% for added strength)
  • Supports: Required on Base connector, but 2 cylinder and one cube support blocker should block magnet holder and badge circle, they don’t need support. Use PLA/PETG Interface layer, opposite whatever you are using for the primary filament. If you print with PLA, use PETG for interface layer and vice versa.

  • Print Orientation: Print base and lid separately on flat side

  • Magnet Insertion: Magnets are embedded into the base and the lid.
    The lid requires a pause at layer 26 to allow the magnets to be inserted.
    The base requires a pause at layer 29 to allow the magnets to be inserted.

Magnets inserted into the base should have the N Pole upwards. Magnets inserted into the lid should have the N Pole downwards.

Assembly

  1. Print the base and lid separately
  2. Insert magnets into the base and lid while printing (see 3d printing instructions for more details)
  3. Ensure the lid fits snugly on the base
  4. For NFC functionality, insert the NFC Badge in the designated slot
  5. Add your slab(s) to the bin
  6. Record the contents in Coinfinity App / NFC Tag

Maintenance

  • Clean with a soft, dry cloth
  • Avoid harsh chemicals
  • Store in a cool, dry place away from direct sunlight